Guanglilai

Classification of electric heating pipes

Aug 25,2022

Author:

Views:


1. Stainless steel finned heating tube, the shape is I type.

2. Stainless steel finned heating tube, the shape is U-shaped.

3. W-shaped finned heating tube, the shape is W-shaped.

Features of finned electric heating tube:

①The heating element is small in size, ②The temperature rises quickly, ③The heating is uniform, ④The heat dissipation performance is good, ⑤The thermal efficiency is high, ⑥Long service life, ⑦Low cost and so on. Often used for heating of still and flowing air.

More News

What are the common refrigerator defrosting heater inspection and maintenance methods

1. The fan motor in the freezing room is damaged, resulting in no circulating cold air, so that the upper box has a certain degree of coldness, and the lower box is not cold. Inspection method: cut off the fan motor winding value, if it is infinite, it means that the fan motor winding is damaged due to open circuit, and the fan motor winding needs to be replaced. 2. The frost layer on the evaporator is too thick due to the damage of the defrost heater, the superheated defrost insurance or the open circuit of the bimetal defrost thermostat, which blocks the gap between the warped sheets of the evaporator and cannot pass the cold air. Maintenance method: Check the status of defrost heater, superheat defrost insurance, bimetal defrost thermostat, and replace damaged components.

Aug 25,2022

View More >

How to calculate the heating power of electric heater

1. Power during operation. Power - Heat loss in the system. All calculations should take into account the worst case: lowest ambient temperature, shortest operation, highest cycle operation, maximum weight of temperature heating medium (flowing medium as maximum flow). 2. Steps to calculate the heater power: According to the process, draw the heating process flow chart (does not involve the material form and specification). 3. Calculate the heat required for the process. Calculates the amount of heat and time required to start the system. Draw the heating process flow chart, consider the appropriate safety factor, and determine the total power of the heater. Determine the sheath material and power density of the heating element, determine the size and quantity of the heater, and determine the power supply and control system of the heater.

Aug 25,2022

View More >

Add: No.9, Xiezhuang Road, Qingyang Industrial Park, Qingyang Town, Jiangyin City, Jiangsu Province, China

Tel: 86-510-86515802 86501557 86511760

Fax: 86-510-86501557

Mobile: 86-13806197135

E-mail: china@guanglilai.com

Guanglilai

Copyright © 2022 Jiangyin Guanglilai Electrical Co.,Ltd.